Table of Contents
Advertisement
CARE & MAINTENANCE
C. Engage and disengage the Harness Tongues and Buckles several
times until a strong audible click is heard when inserting the last
tongue.
D. If you still cannot hear a strong audible click after engaging the
Harness Tongues and Buckle, then repeat cleaning several times.
If the Harness Buckle cannot be returned to its original working
condition then contact Britax Childcare Customer Service.
E. Refit the harness buckle to the restraint with the red button facing
out and feeding each 3-bar slide through appropriate slot.
COVER (STYLE MAY VARY)
The restraint has a flame retardant cover which is removable for cleaning. Cleaning instructions are on
the care label attached to the cover. If fluffy cover is fitted then washing cover prior to use will remove
excess fluff.
Drying the Insert Pad will take additional time as the impact foam will absorb moisture. Before washing
re-engage the hook and loop on the cover and Seat Pad to prevent the 'hook'
damaging the fabric.
The cover has been designed to protect your child when seated in the restraint. Care should be taken if
children either eat or drink while in the restraint as some food or drink products may cause damage or
marking to the cover. Wash or clean immediately.
Do not pull sticky items from covers as the cover may be damaged - soak in water and gently remove.
42
Click
TO REMOVE COVER:
A. Remove the restraint from vehicle.
B. Disengage the harness tongues from the harness buckle.
D. Remove any accessories, pillow, Insert Pad, shoulder pads
(if fitted).
E. Remove headrest cover by unclipping the
press studs on the Headrest hardware,
and then unhooking the elastic loop
attached to the headrest cover.
Pull the headrest cover off the Headrest.
CARE & MAINTENANCE
E
Pull to unclip press stud
Lift lower part of the
headrest cover and
unhook elastic loop
E
43
Hide quick links:
Advertisement
Table of Contents
