Britax 7300 A 2010 Instructions For Installation & Use page 20

HOW TO USE
PLACING CHILD IN THE RESTRAINT
A. Lengthen the harness by pushing and holding
the Harness Adjustment Button (if fitted)
while pulling on both shoulder straps until the
harness is fully lengthened. Release the harness
adjustment button when there is enough slack.
B. Place child in the restraint and feed each arm through
shoulder straps. Pull harness buckle up between child's legs.
38
Pull to
lengthen
Push Harness
Adjustment
Button
Adjuster Strap
C. Fit either harness tongue into
the harness buckle followed by
the other tongue until a click is
heard. Should the second tongue
Tongue
not insert, press the red button
and reinsert the tongues. Ensure
secure engagement by pulling the
harness straps.
C
D. Remove all of the slack from
Pull to remove
the harness lap straps by pulling
slack from
shoulder straps, then pull the
harness lap
harness adjustment strap to adjust
straps
harness to a comfortable but firm fit.
Check that the slack in straps is
removed. The Shoulder Harness
Straps must fit firmly to the child. A
D
loose harness could result in serious
injury in an accident.
Do not use restraint if straps do
not tighten and contact your local
authorised service agent for repair.
CAUTION: A LOOSE HARNESS IS DANGEROUS.
HOW TO USE
Buckle
Click
Shoulder Straps
Harness Lap Straps
Crotch Straps
39