Editing events
Range editing
Express two scene preset User Manual
Time code events may contain a combination of cues, macros and
submasters. Each cue or submaster may have a rate applied, and the
event may be labeled for easy identification.
delete any of these items from an event by following these steps:
Keystrokes:
1. Press [Setup].
2. Press [1][3], Time Code
Events, and press [Enter].
3. Use the arrow keys to
highlight the field of the
item you want to edit.
4. Enter the new contents of
the field. If you wish to
delete the item, press
[Clear].
5. Press [Enter], or use the
arrow keys to select
another field.
If you wish to apply a change to a range of events, you may select multiple
events and edit them all in a single step. For example, if you wanted to set
the rates for your first ten events to 50 percent, you could do so by
following these steps:
Keystrokes:
1. Press [Setup].
2. Press [1][3], Time Code
Events, and press [Enter].
3. Press [S7] until [S1] reads
Select Event.
4. Press [S1], Select Event.
5. Press [1] [Thru] [1][0].
6. Press [S4], Rate.
7. Press [5][0].
8. Repeat steps 6 and 7 for
the remaining rate fields.
13.
The console does not permit labeling directly. Insert labels or edit in
the label field with Expression Off-Line. See Expression Off-Line,
page 310, for more information.
13
You may add, change or
Actions:
Selects Setup display
Selects Time Code Events display
Selects field to edit
Actions:
Selects Setup display
Selects Time Code Events display
Prompt reads:
Select event number
The first rate field is highlighted
Prompt reads:
Select A/B Rate
Sets the rate to 50 percent
299