Sony BVP-900 Series Product Information Manual page 78

10
Location and Function of Parts and Controls
Page 1
*System Diag 1/3*
TRIAX Cable
Comp.
Step
Timer
TRIAX Cable: Triax cable connection status
(connected/disconnected).
TRIAX Comp: Cable compensation of the triax cable
(automatic/manual).
TRIAX Step: Triax cable length.
Timer: Elapsed time on the CCU-550/550P internal AT board.
For details on the internal boards, refer to the system manual.
Page 2
*System Diag 2/3*
CAMERA Cable Connect
Data
Power ON
Tone
RCP/CNU Cable Connect
Data
Power Ok
PANEL Data
CAMERA Cable: Camera cable connection status
(connected/disconnected).
CAMERA Data: Camera data transmission status.
CAMERA Power: Power supply status of the camera.
CAMERA Tone: Camera ID tone status.
RCP/CNU Cable: Connection status of RCP/CNU connector
(connected/disconnected).
RCP/CNU Data: Data transmission status of the RCP/CNU
connector.
RCP/CNU Power: Power supply status of the RCP/CNU
connector.
PANEL Data: Data transmission status of the BKP-5973.
For details on the internal boards, refer to the system manual.
Page 3
*System Diag 3/3*
Intercom
CAMERA CH1 PROD
CAMERA MIC Gain
Cont. Local
CH1 60dB
CH2 40dB
Intercom CAMERA CH1: Status of intercom 1
Intercom CAMERA CH1 MIC: Microphone status of intercom
77
Connect
Auto
2
OH
OK
OK
OK
OK
MIC OFF
(producer/engineer).
1 (on/off).
CAMERA MIC Gain: Gain and control status of the
microphone circuit
For details on the internal boards, refer to the system manual.
Results of self-diagnostics of the CCU-550/550P internal boards
The results of the self-diagnostics of the CCU-550/550P internal
boards are displayed on five pages. To display the results, press the
CHARACTER button on the RCP-700 Series Remote Control Panel
while page 3 of the self-diagnostics of the camera system is
displayed. Press the CHARACTER button again to display successive
pages.
DM board
*DM Diag*
CAMERA Video Y
Prompter
PRMPT/RET3
TRIAX Comp.
Step
Retern Video OK
CAMERA Video: Status of the Y, R-Y and B-Y signals of the
triax signal.
Prompter: Prompter status.
PRMPT/RET3: Selection of cable compensation for the triax
cable (automatic/manual).
TRIAX Comp: Selection of cable compensation for the triax
cable (automatic/manual).
TRIAX Step: Length of the triax cable.
Return Video: Return video signal input status.
For details on the internal DM board, refer to the system manual.
AT board
*AT Diag*
Command CAMERA
RCP/CNU
CAMERA Tone
CAMERA Power
CCU Paint Data
MIC Gain
Cont. Local
CH1 60dB
CH2 40dB
Command CAMERA: Connection of commands to the
CAMERA connector.
Command RCP/CNU: Connection of commands to the
RCP/CNU connector.
CAMERA Tone: Check of the ID tone from the camera.
CAMERA Power: Power supply status of the camera.
CCU Paint Data: On/off of analog control preset on the AT
board of the CCU-550/550P.
MIC Gain: Gain and control status of the microphone circuit of
the camera
For details on the internal AT board, refer to the system manual.
OK
R-Y OK
B-Y OK
NO Video
RET3
Auto
2
OK
OK
OK
OK
Clear