Sony BVP-900 Series Product Information Manual page 123

does not function, and compensation is equivalent to 0 dB.
3) Tilt knob
Adjusts the tilt function.
4) Lift-lock release knob
Allows the viewfinder to be raised from the standard factory preset
position (the lower position) to the middle or top position (the angle
of the viewfinder is only adjustable at these positions). Adjust the
height of the viewfinder while pulling the release knob.
5) POWER switch
ON: The power of the viewfinder is turned on. (Normal position)
OFF: The power of the viewfinder is turned off.
6) Green tally lamps
These illuminate when the camera receives a green tally signal. The
brightness of these lamps is adjustable with an internal control.
7) Red tally lamps
These illuminate when the camera receives a red tally signal. The
brightness of these lamps is adjustable with an internal control.
8) BRIGHT control
Used to adjust the picture brightness. This controls has no effect on
Adjusting the Angle of the Viewfinder
The angle of the viewfinder is adjustable for comfortable viewing.
25°
25°
Tilt knob
Location and Function of Parts and Controls
the video output signal from the camera.
9) Tilt lock lever
Pushing the lever forward toward the lens locks the viewfinder.
Moving it back toward the camera operator allows the tilt friction to
be adjusted with the tilt knob 3).
10) CONTRAST control
Adjusts the picture contrast.
11) SCAN SIZE switch
NORMAL: The screen size is normal.
NARROW: The screen size is 80 % of normal.
12) Up-tally lamp
Functions the same as the red tally lamps on the viewfinder screen.
This lamp does not illuminate when the UP TALLY switch on the
camera is set to OFF.
* To adjust the brightness of this lamp, refer to the manual for the
camera.
* One of the supplied number plates (0 through 9) can be attached
to this lamp.
Tilt lock lever
60°
40°
122
10