Sony BVP-900 Series Product Information Manual page 110

10
Location and Function of Parts and Controls
Iris/master black control block (RCP-721)
13 MASTER BLACK control
14 PREVIEW button
The items 1) through 10) are the same as those shown for the RCP-
720.
11) IRIS control
When the AUTO button is not illuminated, you can adjust the iris
manually by turning the control. When the AUTO button is
illuminated, the reference value for automatic iris adjustment can be
set in a range of +/-1f stop with this control. See the table 'Iris
adjustment functions'.
12) Iris gauge
The white line on the gauge provides a click position for the IRIS
control. Turn the gauge to set the line to the most frequently used
iris position, and it can be used as the reference for manual iris
adjustment. The gauge rotates infinitely in either direction. When no
click position is required, set the line outside the rotation range of
the IRIS control.
13) MASTER BLACK control
Turn to manually adjust the master black level. The setting is
displayed in the MASTER BLACK display.
14) PREVIEW button
Connects the preview signal to the PREVIEW connector.
109
1
MASTER BLACK display
2 MASTER BLACK RELATIVE button
3 IRIS RELATIVE button
4 IRIS display
5
RELATIVE RELATIVE
MASTER BLACK IRIS
CLOSE
PREVIEW
IRIS
Connector Panel
1) CCU/CNU REMOTE (camera control unit/camera command
network unit remote) connector (8-pin)
Connect to the RCP/CNU connector of the CCU-700/700AP or the
RCP connector of the CNU-700.
2) AUX REMOTE (auxiliary remote) connector (8-pin)
Connect to the RCP-700/701.
3) PREVIEW connector (6-pin)
Supplies preview signals. The RCP-721 receives the power from an
external device, such as a video switcher, to illuminate the PREVIEW
button through this connector.
CLOSE button
6 AUTO button
7 EXT indicator
8 IRIS/MB ACTIVE button
EXT EXT
IRIS/MB
ACTIVE
9 SENS control knob
SENS
AUTO
10 COARSE control knob
CLOSE OPEN
COARSE
11 IRIS control
12 Iris gauge
REMOTE PREVIEW
CCU/CNU AUX
3
2 AUX REMOTE connector
1 CCU/CNU REMOTE connector
PREVIEW connector