Space-Ray LTU Series Installation And Operation Instructions Manual page 34

WRONG
US ONLY:
A gas connector certified for use on a tubular type infrared heater per the standard for Connectors A gas connector certified for use on a tubular type infrared heater per the standard for Connectors A gas connector certified for use on a tubular type infrared heater per the standard for Connectors A gas connector certified for use on a tubular type infrared heater per the standard for Connectors
for Gas Appliances, ANSI Z21.24/CSA 6.10 is supplied for installation in US only. The gas connector is 36" long for Gas Appliances, ANSI Z21.24/CSA 6.10 is supplied for installation in US only. The gas connector is 36" long
for Gas Appliances, ANSI Z21.24/CSA 6.10 is supplied for installation in US only. The gas connector is 36" long for Gas Appliances, ANSI Z21.24/CSA 6.10 is supplied for installation in US only. The gas connector is 36" long
and 1 1 1 1 / / / / 2 2 2 2 " n and and and " nominal ID, and must be installed as shown above, in " n " n ominal ID, and must be installed as shown above, in one plane, and without sharp bends, kinks or ominal ID, and must be installed as shown above, in ominal ID, and must be installed as shown above, in
twists. twists. Note: Note: The The gas connector supplied with gas connector supplied with LTS
twists. twists. Note: Note: The The gas connector supplied with gas connector supplied with
CANADA ONLY:
A Type I hose connector should be used that is A Type I hose connector should be used that is certified as being in compliance with the A Type I hose connector should be used that is A Type I hose connector should be used that is
Standard for Elastomeric Composite Hose and Hose Couplings for Conducting Propane and Natural Gas Standard for Elastomeric Composite Hose and Hose Couplings for Conducting Propane and Natural Gas Standard for Elastomeric Composite Hose and Hose Couplings for Conducting Propane and Natural Gas Standard for Elastomeric Composite Hose and Hose Couplings for Conducting Propane and Natural Gas
(CAN/CGA 8.1) and is of length of 36+/ (CAN/CGA 8.1) and is of length of 36+/- - - - 6 in (90+/
(CAN/CGA 8.1) and is of length of 36+/ (CAN/CGA 8.1) and is of length of 36+/
above above, in , in one plane, and without sharp bends, kinks or twists. one plane, and without sharp bends, kinks or twists.
above above , in , in one plane, and without sharp bends, kinks or twists. one plane, and without sharp bends, kinks or twists.
Form #43155010
Sept 2011
INCORRECT POSITIONS
WRONG
WRONG
US ONLY: Connector MUST be installed in " US ONLY: Connector MUST be installed in "⊃ ⊃ ⊃ ⊃ " configuration. Use only
US ONLY: US ONLY: Connector MUST be installed in " Connector MUST be installed in "
the 36" long connector that was furnished with this heater. the 36" long connector that was furni the 36" long connector that was furni the 36" long connector that was furni
LTS/ / / / LTU LTU 2 2 2 2 25 25 and and 250 250 is 36" long and
LTS LTS LTU LTU 25 25 and and 250 250
6 in (90+/- - - - 15 cm). 15 cm). The gas connector The gas connector must be installed as shown
6 in (90+/ 6 in (90+/ 15 cm). 15 cm). The gas connector The gas connector
-33-
WRONG
" configuration. Use only
" configuration. Use only " configuration. Use only
shed with this heater. shed with this heater. shed with this heater.
one plane, and without sharp bends, kinks or one plane, and without sharp bends, kinks or one plane, and without sharp bends, kinks or
is 36" long and 3 3 3 3 / / / / 4 4 4 4 " nominal ID. " nominal ID.
is 36" long and is 36" long and " nominal ID. " nominal ID.
certified as being in compliance with the certified as being in compliance with the certified as being in compliance with the
must be installed as shown
must be installed as shown must be installed as shown