Adjustments; Cable Diagram - Freemotion GZFM6004.3 Owner's Manual

Row

Enlarged version

ADJUSTMENTS

This section explains how to adjust the strength machine. Make sure all parts are properly tightened each time

the strength machine is used. Replace any worn parts immediately.

ADJUSTING THE RESISTANCE

To change the amount of resistance for your workout,

insert the weight pin into the desired weight. Make

sure that the weight pin is fully inserted into the

weight stack.

ADJUSTING THE THIGH PADS

To adjust the height of the thigh pads, pull the adjust-

ment knob out as far as it will go. Slide the thigh

bracket to the desired height and engage the adjust-

ment knob into a hole in the thigh bracket.

Weight

Stack

Thigh

Adjustment

Bracket

Knob

Thigh

Pads

The cable diagram at the right shows the proper route

of the cable. Use the diagram to make sure that the

cable and the cable guards have been assembled

correctly. If the cable has not been correctly routed,

the strength machine will not function properly and

damage may occur. The numbers show the correct

route of the cable. Make sure that the cable guards

do not touch or bind the cable.

Table of Contents

Row