Advertisement

Quick Links

Model No. GZFM6006.6
Serial No.
Write the serial number in the
space above for future reference.
Serial Number Decal
(inside tower)
QUESTIONS?
At FreeMotion Fitness, we're
committed to providing com-
plete customer satisfaction. If
you have questions, see HOW
TO CONTACT CUSTOMER
CARE on the back cover of this
manual.
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
OWNER'S MANUAL
Visit our website at
www.freemotionfitness.com

Advertisement

Table of Contents
loading

Summary of Contents for Freemotion GZFM6006.6

  • Page 1 Model No. GZFM6006.6 Serial No. OWNER’S MANUAL Write the serial number in the space above for future reference. Serial Number Decal (inside tower) QUESTIONS? At FreeMotion Fitness, we’re committed to providing com- plete customer satisfaction. If you have questions, see HOW...
  • Page 2: Table Of Contents

    TABLE OF CONTENTS IMPORTANT PRECAUTIONS ..............3 WARNING DECAL PLACEMENT .
  • Page 3: Important Precautions

    IMPORTANT PRECAUTIONS WARNING: To reduce the risk of serious injury, read the following important precautions before using the strength machine. 1. Read all instructions in this manual before 9. All users of the strength machine should be using the strength machine. Use the strength instructed to report any injury or strength machine only as described in this manual.
  • Page 4: Warning Decal Placement

    WARNING DECAL PLACEMENT The decals shown below have been placed Decal 7 on the strength equipment in the indicated locations. If a decal is missing or illegible, see HOW TO CONTACT CUSTOMER CARE on Decal 6 the back cover of this manual and order a free replacement decal.
  • Page 5: Before You Begin

    The model specifically and efficiently. Whether your goal is to tone number is GZFM6006.6. The serial number can be your body, build dramatic muscle size and strength, found on a decal attached to the strength machine improve your cardiovascular system, or train muscles (see the front cover of this manual).
  • Page 6: Adjustments

    ADJUSTMENTS This section explains how to adjust the strength machine. Make sure all parts are properly tightened each time the strength machine is used. Replace any worn parts immediately. The strength machine can be cleaned with a damp cloth and a mild, non-abrasive detergent. Do not use solvents. ADJUSTING THE RESISTANCE To change the amount of resistance for your workout, Weight...
  • Page 7: Maintenance

    To maintain the strength equipment’s warranty, use only FREEMOTION parts for repair or replacement. If there are any questions or concerns, see HOW TO CONTACT CUSTOMER CARE on the back cover of this manual.
  • Page 8 1. Grips: • Check all nuts and bolts. Tighten them as • Check and replace as needed. required. Important: All FREEMOTION cushions are fabricated using dense plywood with tee- 2. Weight stack guide rods: nuts installed for bolting to the machine frame- •...
  • Page 9 CABLE ADJUSTMENTS ADDITIONAL ADJUSTMENTS CAUTION: After making any cable adjustment, pull the handle using a light load and have someone make Handle End Adjustment—All machines with a sure that the cable is not derailed from a pulley or rub- strap and handle bing on a guard (see CABLE GUARDS on page 10).
  • Page 10 CABLE GUARDS 5. Servicing the weight stack involves replacing the three bushings in the top weight. First, use a Periodically check the alignment of the cable guards to punch to drive the three existing bushings out of ensure that they are not dragging on the cable and the top weight.
  • Page 11 NOTES...
  • Page 12 NOTES...
  • Page 13: Part List

    PART LIST—Model No. GZFM6006.6 R0506A Key No. Qty. Description Key No. Qty. Description Tower 1/2” x 1” Bolt Access Cover 3/4” x 1/2” Shoulder Bolt Right Support Leg Cable Left Support Leg Rubber Cover Right Arm 1/4-20-unc Set Screw Left Arm...
  • Page 14: Exploded Drawing

    EXPLODED DRAWING—Model No. GZFM6006.6 R0506A...
  • Page 15 EXPLODED DRAWING—Model No. GZFM6006.6 R0506A...
  • Page 16: How To Contact Customer Care

    PART LIST and the EXPLODED DRAWING on pages 13 to 15 of this manual). Customer Care: 1-800-201-2109, Monday–Friday, 8 a.m.–5 p.m. Mountain Time FreeMotion Fitness, Inc. • 1096 Elkton Drive, Suite 600 • Colorado Springs, CO 80907 Part No. GZ7377 R0506A...

Table of Contents