Adjustments; Cable Diagram - Freemotion GZFM6006.6 Owner's Manual

ADJUSTMENTS

This section explains how to adjust the strength machine. Make sure all parts are properly tightened each time
the strength machine is used. Replace any worn parts immediately. The strength machine can be cleaned with a
damp cloth and a mild, non-abrasive detergent. Do not use solvents.
ADJUSTING THE RESISTANCE
To change the amount of resistance for your workout,
Weight
Stack
insert the weight pin into the desired weight. Make
sure that the weight pin is fully inserted into the
weight stack.
Weight
Pin
ADJUSTING THE ARMS
To change the position of an arm, pull the adjustment
Arm
knob out and move the arm to the desired position.
Reengage the knob into the adjustment bracket.
Make sure the red collar on the adjustment knob
Adjustment
is not visible.
Bracket
Adjustment
Knob

CABLE DIAGRAM

The cable diagram at the right shows the proper route
of the cable. Use the diagram to make sure that the
cable and the cable guards have been assembled
correctly. If the cable has not been correctly routed,
1
3
the strength machine will not function properly and
5
damage may occur. The numbers show the correct
route of the cable. Make sure that the cable guards
do not touch or bind the cable.
8
6
2
10
9
4
7
6