Fibre Host Adapter Leds - Compaq RAID Array 4100 User Manual

4-2 Compaq StorageWorks RAID Array 4100 User Guide

Fibre Host Adapter LEDs

Figure 4-1. Drive Failure LED
If any Drive Failure LED appears amber, replace that drive as soon as
possible. See "Replacing Components" later in this chapter for important
information on when it is safe to replace drives.
The Fibre Host Adapter has two status LEDs. The Transmit LED
that the Fibre Host Adapter is transmitting data over the Fibre Channel
Arbitrated Loop (FC-AL). The Receive LED
Adapter is receiving data.
1
2
Figure 4-2. Fibre Host Adapter/P LEDs


indicates that the Fibre Host

indicates