Installing The Shock Absorber; Removing The Seat; Mounting The Seat - HUSABERG FE 450 EU Owner's Manual

Motorcycle
Hide thumbs Also See for FE 450 EU:
Table of Contents

Advertisement

12
SERVICE WORK ON THE CHASSIS
12.19

Installing the shock absorber

12.20

Removing the seat

12.21

Mounting the seat

Main work
Remove screw
without blocking the rear wheel. Fix the rear wheel in this position.
Remove screw
absorber.
L00234-10
x
Main work
Push splash protector
tighten screw
Guideline
Screw, top shock absorber
Mount and tighten screw
Guideline
B01278-10
Screw, bottom shock
absorber
Info
The heim joint for the shock absorber at the swing arm is Teflon coated. It
must not be greased with grease or with other lubricants. Lubricants dis-
solve the Teflon coating, thereby drastically reducing the service life.
Finishing work
Remove the motorcycle from the lift stand. (
Remove screws
Lift up the seat at the rear, pull it back, and then lift it off.
L00220-10
Attach the front of the seat to the collar bushing of the fuel tank and lower the seat
at the rear while pushing forward.
Make sure that the seat is correctly locked in.
Mount and tighten the screws for securing the seat.
Guideline
Remaining screws, chassis
L00219-10
and lower the rear wheel with the swing arm as far as possible
1
, push splash protector
2
3
to the side and position the shock absorber. Mount and
1
.
2
M12
.
3
M12
in the recessed grips on the left and right.
1
to the side, and remove the shock
Loctite
80 Nm
(59 lbf ft)
80 Nm
Loctite
(59 lbf ft)
p. 41)
M6
10 Nm (7.4 lbf ft)
49
®
2701™
®
2701™

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents