Controls; Clutch Lever; Hand Brake Lever; Throttle Grip - HUSABERG FE 450 EU Owner's Manual

6

CONTROLS

6.1

Clutch lever

6.2

Hand brake lever

6.3

Throttle grip

6.4

Kill switch (FE EU, FE AUS)

6.5

Kill switch (FE 501 USA)

The clutch lever
The clutch is hydraulically operated and self-adjusting.
B01623-10
Hand brake lever
The hand brake lever is used to activate the front brake.
B01624-10
The throttle grip
B01625-10
Kill switch
1
Possible states
• Kill switch
the engine can be started.
• Kill switch
goes out if it was running, or does not start if it was off.
L00166-10
Kill switch
1
Possible states
• Kill switch
the engine can be started.
• Kill switch
goes out if it was running, or does not start if it was off.
101856-10
is fitted on the left side of the handlebar.
1
is located on the right side of the handlebar.
1
is fitted on the right side of the handlebar.
1
is fitted on the left side of the handlebar.
in basic position – the ignition circuit is closed in this position and
pressed – the ignition circuit is open in this position, the engine
is fitted on the left side of the handlebar.
in basic position – the ignition circuit is closed in this position and
pressed – the ignition circuit is open in this position, the engine
14