Table of Contents
Advertisement
Ready To Arm
Garage Door 1
CLOSED
Close in
Edit
Garage Door Operation Screen
Operate Garage Door from LYNX Touch Control Panel
• When the garage door is open, "Ready to Arm – Fault" is displayed in a yellow band at the top of the display.
Notes:
• If a "Close in" or "Close at" time has been programmed, the garage door will always operate as programmed until the
selection has been cleared.
Step
1.
At the Garage Door operation screen, select the Opened or Closed Garage Door icon to Close or Open the door.
2.
When the door position has changed the icon will switch from Opened to Closed, as applicable, and CLOSED or
OPENED is displayed
Press to open
Close at
Back
5200-100-113-V0
Button or Icon
Edit
Used to modify description of Garage Door
Close in
Provides access to keypad used to set a specific period of
time (up to 12 hours and 59 minutes) before an open garage
door closes automatically. If programmed the time will also be
displayed.
Close at
Provides access to keypad used to set a specific time that an
open garage door closes automatically. If programmed the
time will also be displayed.
Back
Used to return the control to the Garage Door list.
Indicates Garage Door is Closed. Select to Open Garage
Press to open
Door.
Indicates Garage Door is Open. Select to Close Garage
Press to close
Door.
Action
- 19 -
Home Automation
Garage Door Opener Operation
Function
Advertisement
Table of Contents
