Table of Contents
Advertisement
General Information
The Honeywell LYNX Touch L5200 and L7000 controls are security enabled Z-Wave® devices. The controls
feature Z-Wave technology that is designed to automate devices in a home control network. The control allows
you to easily add and control multiple devices with the press of a button and supports Z-Wave Network Wide
Inclusion (NWI) Mode. Check with your installer to see if these features are available.
Your control and every Z-Wave device you add are linked together into a wireless network. Each device in your
network has a unique address assigned to it and cannot be activated by your neighbor's Z-Wave controller. The
Z-wave network supports multiple controllers allowing additional Z-wave remotes to be used throughout the
home. Management of Z-Wave devices, which are also known as modules or nodes, includes two main
operations; inclusion/exclusion and association (or controlling). Refer to the Controlling Z-Wave Devices section
for information regarding "association". The LYNX Touch supports the Association Command Class.
This section describes how to Include (add) devices into your home control network, edit devices and Exclude
(delete) devices. Automation and Z-Wave functions are accessed via the LYNX Touch Automation icon, Z-Wave
Device Management and Z-Wave Advanced Tools screens. The devices can be controlled from the LYNX Touch
control or a Mobile Internet Device (MID). Check with your Installer to see which features are available with
your system. Once the Z-Wave devices have been Included (added) to the network they can be controlled either
manually or through "Scenes" that are programmed in your LYNX Touch control's Automation feature.
The Automation icon on the LYNX Touch Home Screen provides access to Z-Wave Home Automation features.
Refer to the Z-Wave Glossary for additional information regarding terms and functions. A list of compatible
devices can be found in the Z-Wave Compatibility Chart contained in this document.
Ready To Arm
1 :
2 35
PM
October 1, 2013
Location
LYNX Touch Home Screen
Automation is intended for lifestyle convenience. It should not be used for life safety or property protection.
U L
Z-Wave a
utomation functionality is supplementary only and has not been evaluated by UL.
Security
Automation
Video
1 :
2 35
PM
January 12, 2010
Mostly Sunny
68
F
Feels like 71 F
5-Day Forecast
5200-100-121-V0
(Total Connect Remote Services Enabled)
- 3 -
Home Automation
Z-Wave® Programming
Ready To Arm
Security
Automation
News
Traffic
LYNX Touch Home Screen
Video
Notices
7000-100-005-V1
Advertisement
Table of Contents
