Table of Contents
Advertisement
Ready to Arm ...
1
4
Enter Time
10:21
AM
7
AM / PM
Clear
Editing a Scheduled Function
Ready To Arm
Schedule 1
Auto Arm
Auto Stay
Daily
Edit
Add New
Deleting a Scheduled Function
Ready To Arm
Schedule 1
Auto Arm
Auto Stay
Daily
Edit
Add New
7. Program the following options based upon the Frequency
8. Select "Type" then scroll through and select one of the
9. If Auto Stay is selected, select "Clear" then enter a 4-digit time
2
3
6
5
10. Select "Rules" OR "Scenes" then select a Rule or Scene from
8
9
11. Enter a Start Time and End Time on the displayed keypad then
0
Save
12. Select the "" button to return to the Automation programming
5200-100-049-V0
1.
2.
Delete
5200-100-084-V0
Delete
5200-100-084-V0
selected in step 6:
Once
Date/Start Time/End Time
Daily
Start Time/End Time
Weekday
Start Time/End Time
Weekly
Start Time/End Time/Day of the Week,
Monthly
Start Time/End Time/Day of the Month
following options:
None
Auto Night Stay
Auto Stay
Rules
Disarm Notification
Scene (displayed when Z-Wave has been enabled)
on the displayed keypad then select "Save". If "Rules" is
selected proceed to Step 11. If "Disarm Notification" is selected
proceed to Step 12.
the displayed list (Rules 1 through Rules 20).
select "Save".
screen or the Home key to return to the Home screen.
At the Schedules screen, select the Schedule you wish to edit.
Note: Rules 21-40 are only accessible through TotalConnect
Service.
Select the "Edit" button. The Schedule programming screen
will appear. Follow the steps as noted above in the
programming a Scheduled Function section to edit and save
your changes.
1. At the Schedules screen, select the Schedule you wish to
delete.
Note: Rules 21-40 are only accessible through TotalConnect
Service.
2. Select the "Delete" button. A confirmation screen will be
displayed. Select "Yes" to confirm the deletion.
3. Select the "" button. The system returns to the Automation
programming screen.
- 13 -
Home Automation
Schedules
Advertisement
Table of Contents
