Including Z-Wave Devices - Honeywell LYNX TouchL5200 Series Manual

Ready To Arm - Chime
View Enrolled View Enrolled
Devices Controllers
Pri. Controller Shift
Reset Controller
to Secondary
Locking Door
All Devices Off All Devices On
Z-Wave® Advanced Tools Screen
Including Z-Wave® Devices
The functions described below should be accomplished at the LYNX Touch control in order to include (add) Z-
Wave devices to the network.
Z-Wave devices should be in their final location prior to inclusion. When Including a device, it may be
necessary to perform an Exclude before a successful Include can be achieved. This is particularly true if the
device was previously in another Z-Wave network.
Step
1. At the Home Screen select the "Automation" icon.
2. At the second page of the Automation Screen, select "Tools".
At the "Device Management" screen, select "Include Devices". The panel displays "Entering Inclusion Mode. Please
3.
Wait..."
The panel displays "Ready to include device. Press the function button on device". Within one minute press the device's
4.
Function button or activate the switch, as applicable.
If the module has been successfully enrolled, the panel displays "Device Found! Please Wait" and then the device
5.
information is displayed.
6. After successfully including a device, the associated information will be added to the top of the inclusion list.
7. Repeat steps 4 - 6 to enroll additional Z-Wave devices.
Once you have finished including devices, press the "Home" key to return to the Home screen or select the "" button to
8.
return to the previous screen..
Learn
5100-100-075-V1
Pri. Controller Shift
Button
View Enrolled View Z-Wave device information: System Index/name,
Devices Secured or Non-Secured, device type, device ID,
manufacturer, node number
View Enrolled View Controller Information: Controller role: (Primary
Controllers or Secondary), Z-Wave Library Rev., Home ID, device
type, device ID, node number, manufacturer, Secured
or Non-Secured.
Reset Controller Deletes all nodes and generates a new random Home
ID. Resetting the Controller does not Exclude the
individual devices; therefore, each device will need to
be Excluded before being Included into a Controller.
Transfers the role of primary controller to another
controller (i.e.; a Z-Wave remote control) and
to Secondary
duplicates the Z-Wave network.
Note: Although both controllers can operate the Z-
Wave
Include/Exclude devices.
Locking Door Enable Arm Stay, Arm Away or Arm without Auto-Stay
when Z-Wave door lock is locked. Causes the system
to arm in the selected mode, Away, Stay, or Away
without Auto-Stay when the Z-Wave Door is Locked.
Learn Includes the panel as secondary controller, usually on
a Z-Wave remote control, and duplicates the Z-Wave
network.
Devices (switches and thermostats only) may be
Included using the Z-Wave remote control and the
information can be transferred to the control panel
using this feature. The secondary controller (control
panel) cannot have Z-Wave devices Included. The
Learn button is selected after Include process is
started on the primary controller.
All Devices Off Allows User to "manually" turn Off all switches.
Note: Some thermostats will enter Setback mode.
All Devices On Allows User to "manually" turn On all switches.
Note: Some thermostats will exit Setback mode.
Action
- 5 -
Home Automation
Z-Wave® Programming
Function
devices, only the Primary can