Running A Scene - Honeywell LYNX TouchL5200 Series Manual

Home automation guide
Table of Contents

Advertisement

Ready To Arm
Scene 1
Scene 2
Burglary Alarm
CO Alarm
Scene 3
Scene 4
Fire Alarm
Arm Stay
Add New
Edit
Scene

Running a Scene

Ready To Arm
1 :
2
35
PM
October 1, 2013
Security
Mostly Sunny
68
F
Feels Like 71
F
5-Day Forecast
News
Ready To Arm
Scenes
Schedules
Rules
Ready To Arm
Scene 1
Scene 2
Burglary Alarm
CO Alarm
Scene 3
Scene 4
Fire Alarm
Arm Stay
Add New
Edit
Scene
Delete
5200-100-110-V1
Automation
Video
Traffic
Notices
5200-100-001-V0
Tools
Garage door setup
5200-100-053-V0
Delete
5200-100-110-V1
3. Select the scene you wish to edit or delete.
4. Select the "Edit" or "Delete" button.
5. If "Edit" was selected, the system advances to the Scene. Edit as
required and proceed to step 6. If delete was selected proceed to
step 7.
6. Select Save when complete. The system returns to the Z-Wave
device screen. Select the "" button as required to return to the
Automation programming screen or the Home or Dashboard
screen.
7. The system displays a confirmation screen and then returns to
the previous screen. Select the "" button as required to return
to the Automation programming screen or the Home key to
return to the Home screen.
1. With the system in the disarmed state, select the "Automation"
icon from the Home Screen. The system displays the first page
of the Automation screen. Select the "" icon to advance to the
second page of the Automation screen.
2.
Select the "Scenes" icon from the second page of the
Automation screen. The system displays the Scenes screen.
3. Select the scene you wish to run.
"
"
4. Select the
button to run the scene.
- 11 -
Home Automation
.
Scenes

Advertisement

Table of Contents
loading

Table of Contents