Lan Interface; Least Cost Routing - Samsung OfficeServ 7030 General Description Manual

IN GROUP/OUT OF GROUP
Individuals assigned to a station hunt group may temporarily remove their telephones from the group by
pressing the In/Out of Group button (IG) providing that there is someone still in the group. There is a system
wide option to allow all members to log out of a station group. Stations out of a group will not receive calls
to that group but will continue to receive calls to their individual extension numbers. When desired, the user
may put him/herself back into the group by pressing the button again. Users who do not have this button
may dial the access code and the group desired. A station user is allowed to be in several groups, providing
a key and the extender of that group are assigned for each group on the user's phone.
INCOMING CALL DISTRIBUTION
Incoming calls can be assigned to ring a distributed station hunt group. This allows all members of the group
to share the call load.
INCOMING/OUTGOING SERVICE
Outside lines are available for incoming or outgoing service. Programming allows any outside line to be used
for incoming calls only, outgoing calls only or both way service.
INDIVIDUAL LINE CONTROL
Each station in the system can be individually programmed to allow or deny dialing out as well as allow or
deny answering for each outside line.
IP KEYSETS
The OfficeServ 7030 system allows the use of Samsung proprietary keysets that use Internet Protocols (IP) for
voice and data transport. They may be local to the system or installed in a remote location via a LAN/WAN.
The OfficeServ 7030 can support up to 16 IP stations. An "IP station" is considered to be any of the following:
SMT-i3105, SMT-i5200 Series, ITP-5100 Series, Softphone, or wireless handset SMT-5100E.
tion on how to setup the IP keysets please refer to the VOIP Special Applications Section of the Technical
Manual and the Hot Desking (IP Keysets) section above.

LAN INTERFACE

The OfficeServ 7030 main unit provides a 10/100 base T Ethernet interface for connection to a data network.
This interface allows a high speed connection for PC programming across an IP network along with other
devices/applications on the network such as IP phones, SPNet, CTI, LAN printers, etc.

LEAST COST ROUTING

Least Cost Routing (LCR) is the ability to automatically select the most cost effective central office route for
the outside number dialed by any station. The OfficeServ 7030 LCR program includes the following features:
• Option to use or not user LCR or a tenant basis
• Programmable LCR access code
• Digit analysis table of 2000 entries each with ten digits
• Routing by time of day and day of week (4 time bands per day)
• Modify digits table of 200 entries
• Flexible trunk group advance timer
• Option to use or not use trunk group advance warning tones
4.18
For more informa-