Samsung OfficeServ 7030 General Description Manual page 10

Figure 1-5 indicates the physical and virtual hardware ports used to support each system device type.
ITEM
Max # of Analog Trunk Ports
Max # of SIP Trunk Ports
Max # of SPNet Trunk Ports
MAX # OF TRUNKS CANNOT EXCEED 8.
Max # of Analog Sets
Max # of Digital Sets
Max # of Samsung IP Phone Ports
Max # of Samsung Softphone
Max # of WLAN Phone Ports
Max # of SIP Station Ports
MAX # OF STATION PORTS CANNOT EXCEED 20.
Max # of AA/VM Ports
MAX STATIONS + TRUNKS + VM/AA
Max # of MGI Ports
MAX # OF MGI PORTS CANNOT EXCEED 4.
Max # of Virtual SLI Ports
Max # of Virtual DLI Ports
Max # of MOBEX
MAX # OF VIRTUAL ANALOG + DIGITAL STATION PORTS CANNOT EXCEED 20.
Max # of Network Nodes
Max # of Station Group Members
Max # of Virtual Ports Supported
NOTE: Although virtual cabinets for SLI, DLI, WIFI, ITP, SPNet and SIP channels can be assigned to exceed the num-
ber of recommended stations and trunks (80 virtual ports total), it is not advisable to expand beyond the maxi-
mum of 8 trunks and 20 stations. Limited MGI, MPS and VM resources will create limits that will make the system
unbalanced and blocking.
MAXIMUM #
4 1 4TRK cards = 4
8 2 virtual slots x 4 ports = 8
8 2 virtual slots x 4 ports = 8
10 2 4SM + 2 ports = 10
8 2 4DM = 8
16 4 virtual slots x 4 ports
16 4 virtual slots x 4 ports
16 4 virtual slots x 4 ports
16 4 virtual slots x 4 ports
2 2 AA ports (2 VM ports need license key)
30 20 STN + 8 TRUNKS + 2 VM = 30
4 4 MGI Embedded (needs MGI license key)
20 5 virtual slots x 4 ports
20 5 virtual slots x 4 ports
20 5 virtual slots x 4 ports
99
16
80 4 channels x 20 slots x 5 cabinets = 80
1.6
AVAILABLE HARDWARE
FIGURE 1-5