Riso Perfect (G) ComColor Series User Manual page 36

1 Functions for Binding
It may take a long time to warm up the glue
unit to the suitable temperature. It is recom-
mended to confirm the glue tank temperature
before performing the job.
1 Press [Functions] on the printer
mode screen.
2 Press [Manual binding].
The [Manual binding] screen is displayed.
3 Set the body page size and press
[OK].
1-6
Load the cover and body pages
4
into the Perfect binder, and press
[OK] on the confirmation screen.
Alternatively, press the [Start] key.
For the manual binding, all the papers loaded
in the body sheet stacker are bound up into a
volume of booklet. Load one booklet amount
of body pages.
The binding starts. When completed, the
confirmation screen is displayed.
When the glue temperature is low, the warm-
ing up starts. When it becomes the stand-by
mode, the binding starts automatically.
5 Press [Finished] on the
confirmation screen.
● To continue the manual binding, load the cover
and body pages into the Perfect binder and
press [OK].
● To perform [Manual binding] with different
paper size, repeat the step 2 to 5.
Perfect binder User's Guide 05