Riso Perfect (G) ComColor Series User Manual page 35

3 If the glue temperature is low,
press [Prewarm].
● Press this button when the front, side cover
and the cover sheet inserter are closed. When
the cover is opened, you cannot press the
[Prewarm] button.
● When the Perfect binder is in the binding
mode, you cannot use the [Prewarm] button.
■ Setting on the RISO Console
1 Click [Printer] in the monitoring
screen.
Click [Functions].
2
Operations of the Binding Job
3 Click [Glue temperature].
The [Glue temperature] screen is desplayed.
4 When the glue temperature is low,
click [OK].
● Perform this operation when the front, side
cover and the cover sheet inserter are closed.
When the cover is opened, you cannot
prewarm the Perfect binder.
● The prewarm is disabled when the Perfect
binder is in the binding mode.
Manual Binding
Load the printed cover and body pages into the
Perfect binder and create the booklet offline. For
manual binding, load one cover sheet and one set
of body pages.
If either of the following images exist within 5
mm (3/16") from the cover binding margin, the
glue does not fix so that the body pages peel
off easily. Please be careful when you create
the cover.
• Solid black, thick color
• A ruled line thicker than 3 pt
Perfect binder User's Guide 05
1
1-5