Changing Finished Job And Folder Job Settings - Riso Perfect (G) ComColor Series User Manual

Changing the Setting During
Printing
1 Press the [STOP] key.
The [Confirm] screen is displayed.
• To cancel printing and delete the job, press
[Cancel].
• To continue printing, press [Continue].
2 Press [Setting chg.].
The [Suspending] screen is displayed.
On the [Basic] tab in the [Suspending] screen, you
can change the following settings.
• "Image position"
• "Body sheet tray"
You can select the feed tray for body pages or
set the paper size and type.
• "Print density"
● To change the feed tray setting for cover,
configure the settings in [Feed tray] on the
[Functions] tab screen.
● To confirm the settings, press [Settings].
● For the setting items and method, see the
printer manual.
Operations of the Binding Job
3 Change the setting if required, and
press [Print].
Printing the configured job begins.
The [Body sheet tray] can be used only on the
[Suspending] screen. The settings cannot be
changed from the [Finished job] screen or
[Details] on the [Folder job] screen.
Changing Finished Job and
Folder Job Settings
Display the job list.
1
Press the screen selection button of the job list to
be displayed.
2 Select the job with the settings to
change.
To cancel the selection, press again.
3 Press [Details] and change the
settings.
The [Details] screen is displayed.
You can change the following settings.
• "Image position"
• "Print density"
On the [Details] of the [Folder job], you can
rename the job and save it.
Perfect binder User's Guide 05
1
1-3