Start Here - BT Total Broadband Getting Started Manual

Welcome

Start here

You can start setting up at any time, but if you're new to BT Total Broadband your line might
not be activated until midnight on your activation day.
Unplug any existing broadband kit
1
If you've had broadband before – from BT or
elsewhere – unplug your old modem, router
or Hub and set it aside. You can leave any ADSL
filters plugged in for the moment.
Fit your ADSL filters
2
Fit a filter to every phone socket that
you use in your home, unless you
have filters in place from a previous
service. Use your new ones where you can.
Sockets could be used by telephones,
faxes and digital TV boxes. All these
devices plugged into phone sockets
need a filter to prevent interference
with your broadband service.
Need more filters? Go to
2
Follow these simple steps to set up your
BT Home Hub and get online.
bt.com/shop
Connect your Hub
3
Using the broadband cable (grey ends),
1
connect your Hub to an ADSL filter.
Plug your Hub into a mains power socket.
2
1
Your SSID and wireless key details are on the front of this tab
2