Digital In/Out And X-Link - ALLEN & HEATH XONE:DB4 User Manual

DIGITAL INPUT: The XONE:DB4 has four digital inputs on the rear panel designed for standard 75
Ohm RCA interface cables. These inputs are compatible with the following formats:
AES3, IEC60958, S/PDIF (Sony/Phillips Digital Interconnect Format), EIAJ CP1201, all from 32kHz to
192kHz, and up to 24bits.
Digital Output: The digital output is fixed at 48kHz/24 bit, non copy protected, with a 75 Ohm imped-
ance.
The digital output source, and signal level is set in the Menu under "Record Setup", see page 24 for
details.
X-LINK
X-Link is a proprietary interface protocol to enable future Allen & Heath accessories and controllers to
be easily connected to the XONE:DB4. Visit www.XONE.co.uk for the latest news on X-Link enabled
products.
DIGITAL ARCHITECTURE SPECIFICATION
Analogue/Digital conversion
Analogue/Digital Line-up
DSP processing
DSP Mix Bus
DSP core sampling frequency
USB soundcard sampling frequency range
SPDIF input sampling frequency range
SPDIF Output sampling frequency
QUAD FX Core DSP engine: 4 simultaneous FX engines with independent BPM calculation. 4 stereo
Loopers with BPM conscious looping, 4 bars at 60BPM maximum sample time.
Allen & Heath
DIGITAL IO - X-LINK
DIGITAL INPUTS - DIGITAL OUTPUT
DIGITAL INPUTS 1– 4
DIGITAL OUTPUT
24 bit
+12dBu = 0dBFS
24 bit I/O + 48 bit EQ
56 bit Fixed Point
48kHz
44.1kHz to 96kHz
32kHz to 192kHz
48kHz
40
X-LINK
XONE:DB4 User Guide