Mic/Line Channel - ALLEN & HEATH XONE:DB4 User Manual

Allen & Heath
MIC / LINE CHANNEL
MICROPHONE INPUT CONNECTOR
1
1
Balanced XLR.
microphone here.
dynamic mic such as those specifically designed for vocals.
Do not use high impedance or unbalanced microphones,
or condenser types which require phantom power.
2
Use the best professional grade balanced cables and
connectors you can afford, as these are typically subject to
intense use and abuse in the club environment.
3
MIC / LINE SELECTOR SWITCH
2
Selects the channel source between MONO Microphone
4
and STEREO Line input connectors
LINE INPUT CONNECTOR
3
Dual RCA sockets for connecting an external line level
source.
5
GAIN CONTROL
4
6
Sets the level of the source signal to the channel.
MIC EQ Controls
5
The MIC equaliser provides a tool to adjust the tonal
quality of the sound to correct source problems such as
microphone
feedback, to help the voice cut through the mix, or to
adjust the overall 'feel'. Start with the EQ controls set to
their mid (flat) position, then adjust to achieve the desired
sound.
CHANNEL PEAK LED
6
Illuminates if the channel signal is within 3dB of clipping.
Plug in a DJ, guest or announcement
Use a good quality low impedance
response, proximity
8
effect, noise and
XONE:DB4 User Guide