ALLEN & HEATH XONE:DB4 User Manual page 14

Allen & Heath
MASTER SECTION
HEADPHONES OUTPUTS
7
Stereo 1/4" TRS jack and 3.5mm mini-jack. Plug in good
quality stereo headphones intended for DJ monitoring.
Use closed-ear headphones that provide maximum acous-
tic isolation when cueing your sources. We recommend
that you use high quality headphones rated between 30 to
100 ohms impedance. 8 ohm headphones are not recom-
mended as their very low impedance may cause damage to
the headphone amplifier.
CHANNEL FADER CURVE SELECT
8
Sets the response of the Channel Up faders. Choose a
setting that best suits the style of music you play.
CROSSFADER CURVE SELECT
9
Sets the response of the Crossfader curve, from dipped,
dipless, and fast-cut, better suited to scratching.
7
8
9
14 XONE:DB4 User Guide