Wireless Beeper Definitions - Motorola DS6878 Product Reference Manual

Hide thumbs Also See for DS6878:
Table of Contents

Advertisement

Wireless Beeper Definitions

When the digital scanner scans the pairing bar code it issues various beep sequences indicating successful or
unsuccessful operations.
beeper definitions, see Beeper Definitions on page 2-1.).
Wireless Beeper Definitions
Table 4-2
Beeper Sequence
Four long low beeps
Five high beeps
High/low/high/low beeps
Low/high beeps
High/low beeps
Long low/long high beeps
Long low/long high/long low/
long high beeps
defines beep sequences that occur during pairing operations. (For additional
Table 4-2
1. A transmission error was detected in a scanned symbol. The data is ignored.
This occurs if a unit is not properly configured. Check option setting.
2. When communicating with a cradle, the cradle acknowledges receipt of data. If
the acknowledgment is not received, this transmission error beep sequence
sounds. Data may still have been received by the host. Check the host system for
receipt of transmitted data. If data was not received by the host, re-scan the bar
code.
Emitted every 5 seconds while a reconnection attempt is in progress. (See
Auto-reconnect Feature on page 4-14.)
Pairing bar code scanned.
Bluetooth connection established.
Bluetooth disconnection event.
Note: When connected to a remote device using SPP or HID, if a disconnect beep
sequence sounds immediately after a bar code is scanned, check the host device
for receipt of transmitted data. It is possible that an attempt was made to transmit
the last bar code scanned after the connection was lost.
Page timeout; remote device is out of range/not powered. (See Auto-reconnect
Feature on page 4-14.)
Connection attempt was rejected by remote device.
Note: In the case of Pairing Methods on page 4-21, the cradle may already be
connected to another digital scanner in single Point-to-Point locked mode, or the
piconet may be full in Multipoint-to-Point mode. If Pair On Contacts is enabled and
the digital scanner that is inserted is already connected to the cradle, no beeping
occurs.
Radio Communications
Indication
4 - 3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents