5 - 30 DS6878 Product Reference Guide
Timeout Between Decodes, Same Symbol
Use this option in presentation mode and Continuous Bar Code Read to prevent the beeper from continuously
beeping when a symbol is left in the digital scanner's field of view. It is programmable in 0.1 second increments
from 0.0 to 9.9 seconds. The default interval is 0.5 seconds.
To select the timeout between decodes for the same symbol, scan the bar code below, then scan two numeric bar
codes from
Appendix D, Numeric Bar Codes
that correspond to the desired interval, in 0.1 second increments.
Timeout Between Decodes, Same Symbol