Decode Session Timeout - Motorola DS6878 Product Reference Manual

User Preferences & Miscellaneous Digital Scanner Options 5 - 29

Decode Session Timeout

This parameter sets the maximum time decode processing continues during a scan attempt. It is programmable in
0.1 second increments from 0.5 to 9.9 seconds. The default timeout is 9.9 seconds.
To set a Decode Session Timeout, scan the bar code below. Next, scan two numeric bar codes from
Appendix D,
that correspond to the desired on time. Enter a leading zero for single digit numbers. For
Numeric Bar Codes
example, to set a Decode Session Timeout of 0.5 seconds, scan the bar code below, then scan the 0 and 5 bar
codes. To correct an error or change the selection, scan Cancel on
page D-3.
Decode Session Timeout