Code 128 Emulation - Motorola DS6878 Product Reference Manual

15 - 74 DS6878 Product Reference Guide

Code 128 Emulation

Parameter # 7Bh
Enable this parameter to transmit data from certain MicroPDF417 symbols as Code 128. UPC/EAN/JAN
Supplemental AIM ID Format on page 15-14 must be enabled for this parameter to work.
Enable Code 128 Emulation to transmit these MicroPDF417 symbols with one of the following prefixes:
]C1 if the first codeword is 903-905
]C2 if the first codeword is 908 or 909
]C0 if the first codeword is 910 or 911
Disable Code 128 Emulation to transmit these MicroPDF417 symbols with one of the following prefixes:
]L3 if the first codeword is 903-905
]L4 if the first codeword is 908 or 909
]L5 if the first codeword is 910 or 911
Scan a bar code below to enable or disable Code 128 Emulation.
NOTE Linked MicroPDF codewords 906, 907, 912, 914, and 915 are not supported. Use GS1 Composites
instead.
Enable Code 128 Emulation
(01h)
*
Disable Code 128 Emulation
(00h)