Restrictions On 2-Up Printing - Riso RZ Series Manual

ORCH_GB.book Page 40 Thursday, February 19, 2004 2:08 PM
Setting up for Scanning Originals

Restrictions on 2-Up Printing

2-Up printing restricts the sizes of paper to be used, paper orientations, and the enlargement/reduction ratios.
Enlargement/reduction ratio
The table shows enlargement/reduction ratios suitable for 2-Up printing.
A3 (for RZ2XX,
unavailable)
Print
B4
Paper
A4
B5
:For RZ2XX, you cannot make selections.
Paper orientation
Before printing, check the orientations of the original and print paper.
Orientation of originals
Always place originals in the orientation below.
Orientation of print paper
Always place print paper in the orientation below.
40
Printing Originals Side-by-Side [2-Up Printing]
Original
A4 B5
100% 116%
87% 100%
71% 82%
61% 71%
A5 B6
141% 163%
122% 141%
100% 116%
87% 100%