Riso RZ Series Manual page 88

ORCH_GB.book Page 88 Thursday, February 19, 2004 2:08 PM
Troubleshooting
Location Error No.
No.
F-01
F-02
d-05
d-08
d-09
d-17
d-07
F-37
b-01
88
Check & Error Display
Cause
A master has not been wrapped
around the Print Drum.
The master currently wrapped around
the Print Drum for print size is larger
than paper placed on the Paper Feed
Tray.
A master roll has not been set or has
not been correctly set.
The Master Making Unit has not been
correctly set.
The Master Making Unit Cover has not
been closed.
An inappropriate master roll has been
set.
The section on the master core is
missing, or it has worn off, or it has
been tilted.
The Master Disposal Box has not been
set or has not been correctly set.
Originals have been placed in the ADF
unit (option) in the Book shadow
editing.
A card has not been set to the Key
Card Counter (option).
Action
Place an original and start with the master-
making process.
If you leave the machine without a master
wrapped around the Print Drum, malfunction
may occur. Press the key, and then press
the key. Or perform master-making
operation to wrap a master around the drum.
Press the key, and then replace with
paper in larger size.
If you start to print without paper replacement,
the part outside the paper size smudges the
Pressure Roller. If you want to start printing
regardless of this problem, press the
or the key.
To stop printing, press the
Set a master roll correctly and close the
Master Making Unit Cover.
p.70
If a rewound master has been wrinkled or has
worn off, cut the edge of the master straight
and then set the master again.
Set the Master Making Unit correctly.
p.70
Pull out the Master Making Unit and close the
Master Making Unit Cover completely.
p.70
Set a master roll specific to the machine.
The section on the master core contains
information needed for making masters.
If the machine cannot read the information, it
does not operate. Set a dedicated Master Roll
that has the mark and is free from wear
and tilt.
Set the Master Disposal Box correctly.
p.73
Press the key and then place an original
on the Platen Glass.
Or quit the Book shadow editing.
Set a card to the Key Card Counter.
key
key.
p.38