Maximum Printing Areas And Margins; Materials Not To Be Printed - Riso RZ Series Manual

ORCH_GB.book Page 18 Thursday, February 19, 2004 2:08 PM
Before Starting to Use

Maximum Printing Areas and Margins

The maximum printing areas are as follows.
Model
RZ370
RZ300
RZ230
RZ200
Important!:
• No matter which size of originals is printed, the margins indicated on the figure are required for the originals.
Reduce the original if necessary to fit it inside of the margins. Place an original so that its end having a 5 mm margin
at least comes to the left of the Platen Glass.

Materials Not to Be Printed

Do not use the machine in any manner which violates the law or infringes on established copyrights, even when mak-
ing copies for personal use. Consult your local authorities for further details. In general, use discretion and common
sense.
18
Originals
Maximum Printing Area
291mm×413mm
210mm×290mm
251mm×357mm
210mm×290mm
Usable Maximum Print Paper Size
297mm×432mm