Setting The Admin Password Over A Secure Connection; Live View Page - Syscom Video NCT-2211 Quick Installation Manual

3.3 Setting the admin password over a secure connection

To gain access to the product, the password for
the default administrator user must be set. This
is done in the "Admin Password" dialog, which is
displayed when the network
for the setup at the first time. Enter your admin
name and password, set by the administrator.
Note: The default administrator username and
password is "admin". If the password is lost, the
Network Camera must be reset to the factory
default settings. See "3.6 Resetting to the Factory
Default Settings".

3.4 Live View Page

The live view page comes in eight screen
modes: 1920x1080, 1280x1024, 1280x720,
720x480(576), 640x480,
and 320x240. Users are allowed to select
the most suitable one out of those modes.
Please, adjust the mode in accordance with
your PC specifications and monitoring
purposes.
1) General controls
Live View Page
The video drop-down list allows you to select a customized or pre-programmed
video stream on the live view page. Stream profiles are configured under Setup > Basic
Configuration > Video & Image. For more information, please see "3.5.1 Basic Configuration >
Video & Image" of User's Manual.
The resolution drop-down list allows you to select the most suitable one
out of video resolutions to be displayed on live view page.
The protocol drop-down list allows you to select which combination of
protocols and methods to use depends on your viewing requirements, and on the properties of
your network.
is accessed
camera
352x240(288)
Search & Playback Page
10
Quick Installation Guide
Setup Page Help Page