8.5)
LTU 80-130 SERIES HEATER ASSEMBLY
During field assembly of the heater, the recommended procedure is as follows:
1. Install the suspension (according to Section 8.1) using proper suspension method (see Section 5.0).
Trapeze Method
Trapeze Method
Trapeze Method
Trapeze Method
2. Lift the body section and suspend it into place. When lifting, caution should be used to avoid damaging the
assembly. Make sure that the long axis of heater is level.
Individual Suspension Method
Individual Suspension Method
Individual Suspension Method
Individual Suspension Method
-12-
Form #43155010
May 2013