Ltu 125-250 Series - Joining Of 5' And 10' Body Sections - Space-Ray LTU 80– N5 Installation And Operation Instructions Manual

8.6) LTU 125-250 SERIES – JOINING OF 5' AND 10' BODY SECTIONS
These models require the use of an additional 5' body section for LTU 125-175 and 10' body section for LTU 180-
250, as shown in Section 8.1). Follow the instruction below for joining these sections.
1. Join the tube flanges of the body sections together with gaskets in between. Secure the flanges with the ¼-
20 screws and locknuts provided.
2. Assemble the control box, draft inducer, and other components as previously described in the heater
assembly instructions.
Form #43155010
May 2013
DETAIL “B”
Reflector Clamp Installation
-15-
DETAIL “A”