Clearing Service Counter - Brady BP-PR PLUS series Configuration Instructions

BP-PR PLUS series
Service functions
9. Press the ↵ button.
The selected firmware file is copied. A progress indicator is displayed while the firmware is being cop-
ied. OK appears in the display once copying is successfully completed.
10.Press the ↵ button.
6.1.3 Error messages during the firmware update
If an error occurs during the update, one of the following error codes is shown in the display:
Error code
C
H
E
V
P
Tab. 21: Possible error codes with a firmware update
If an error occurs with a firmware update, the old firmware version is no longer usable. Restart program-
ming in this case.
6.2

Clearing service counter

Access only when service key is inserted!
The printer has total and service counters.
•
Total counter: The total counter contains the values for the entire service life of the printer up to now.
The values of the total counter are displayed in the Short status and in the Status print.
•
Service counter: The service counter can be reset after more substantial maintenance or repair work
with the service key inserted. Here, it provides information on the printing output since the last reset.
The values of the service counter are displayed in the Status print.
The following data is recorded in both counters:
Data
Operative time
Number of labels Number of labels printed
Transfer printing
Thermal printing
Tab. 22: Total and service counter data
1. Insert service key into a USB master interface.
2. Press the menu button.
3. Select Service > Clr. service ctr. menu.
4. Press the ↵ button.
No appears in the display.
50
Meaning
Checksum error. /b may have been forgotten in the COPY command or the file is defec-
tive.
Header error. /b may have been forgotten in the COPY command or the file is defective.
EPROM could not be cleared.
Programming voltage is too low.
Programming error.
Description
Printer switch-on time
Length of medium printed with transfer printing
Length of medium printed with thermal direct printing
Configuration Instructions Edition 3/07