Navigating The Offline Menu - Brady BP-PR PLUS series Configuration Instructions

BP-PR PLUS series
Offline menu
1st menu level
Service
Tab. 7: Menu structure
3.2

Navigating the offline menu

You can control all settings and functions in the offline menu with the navigator pad.
Fig. 5: Navigator pad
You can also make all settings in the offline menu via the Ethernet interface (see "4.2" on Page 28) or
via direct control commands (see "Programming Manual").
Edition 3/07
2nd menu level
Firmware upd.
Firmw. fr. card
Clr. service ctr.
Adj. gap sensor
Save settings
Load settings
OEM Name
Cleaning interval
⇒ Press the menu button to switch from Ready mode to the offline menu.
⇒ Press the
or button to select menu items on a menu level or to select
values on the parameter level.
⇒ Press the
button on the top menu level several times, if necessary, to
switch from the offline menu to Ready mode.
⇒ Press the
or button to reach a higher or lower menu level or to set
values on the parameter level.
⇒ Press the ↵ button briefly to enable value selection on the parameter level,
accept a selected value or start a function.
⇒ Press and hold (> 2 sec.) the ↵ button to exit the parameter level without
accepting the parameter setting.
Configuration Instructions
Access
PIN protection possible
PIN protection possible
Only with service key inserted
Only with service key inserted
Only with memory card inserted,
PIN protection possible
Only with memory card inserted,
PIN protection possible
Only with service key inserted
Only with service key inserted
19