Brady BP-PR PLUS series Configuration Instructions page 34

BP-PR PLUS series
Configuration
Printer status line tab
On the "Printer status line" tab, you can select the status parameters which are to be displayed on the
printer status line.
Fig. 10: "Printer status line" tab on the printer website
Adding a status parameter:
1. Select widget in pull-down menu.
2. Click Set.
The symbol, the parameter designation and the width of the symbol in the display (in pixels) are dis-
played in the top section of the tab. The entire width of all symbols in the display (e.g. 92 pixels) and
the maximum width of the display (e.g. 128 pixels) are displayed in the "Display usage" field.
Removing a status parameter:
1. Select parameter in the list.
2. Click Remove.
34 Configuration Instructions Edition 3/07