Font List - Brady BP-PR PLUS series Configuration Instructions

BP-PR PLUS series
Test functions
5.4

Font list

The Font list function prints the most important parameters of the fonts available in the printer in tab-
ular form. The table contains both the original fonts in the printer and other fonts loaded into the printer.
The printout occurs using the heat level and print speed specified in the Setup > Print param. menu.
The printout occurs without taking the label gaps into consideration. This is why endless media are most
suitable for this purpose.
1. Insert printable medium (labels, endless paper) which extends across the entire printing width.
2. If the printout is to occur using thermal transfer printing, insert transfer ribbon with the maximum
width.
3. Press the menu button.
4. Select Test > Font list menu.
5. Start printout with the ↵ button.
You can cancel the printout with the cancel button.
Fig. 14: Font list
The parameters have the following meaning:
Column
No.
Name
Type
Description
Tab. 18: Parameters of the Font list
Edition 3/07
Meaning
ID number of the font required for programming (command T).
Name with which the font is saved internally.
Type of font generation. It provides information on the variability of the font and is
important when programming (command T).
Explanations of the font: size, font family. The printout occurs in the appropriate
font.
Configuration Instructions 41