Brady BP-PR PLUS series Configuration Instructions page 31

BP-PR PLUS series
Configuration
Setup tab
On the "Setup" tab, you can set all the configuration parameters which are also accessible via the oper-
ating panel in the Setup menu. In addition, other parameters for the Ethernet interface can be set (see
below).
Fig. 8: "Setup" tab on the printer website.
The menus and parameters are arranged in a tree structure in the top section of the tab. The tree struc-
ture can be expanded in different ways:
⇒ Click circular symbol in front of the menu symbol once.
The corresponding menu is expanded.
⇒ Double-click menu symbol or menu name.
The corresponding menu is expanded
⇒ Click the Expand All button.
The tree structure is fully expanded.
To change a parameter:
1. Locate parameter in the tree structure.
2. Click parameter name or the symbol next to it.
3. Enter value of the parameter in the input field in the bottom section of the tab.
4. Click Set.
5. Enter PIN and click OK.
The printer can be given a name on the top line of the tree structure. This name does not have a func-
tional meaning. Its sole purpose is to allow the operator to more easily differentiate between the printers
on a network.
Information is not updated automatically while the "Setup" tab is open. Updating occurs when the tab is
changed or by clicking the Update button.
Edition 3/07 Configuration Instructions 31