Pioneer AVIC-Z2/XU/UC Service Manual page 280

5
4. Procedure for checking
Display
5
6
ND-BT1/E5 will be connected to the connectable product, and
start.
Select [Menu] [Settings]
Make sure on the left screen that the items under Phone Conn-
ection Status are indicating [OK].
In this case, because registration of the BT telephone has not
been completed, level indication of the antenna bar is not displ-
ayed even though the status is indicated as OK.
* In the case of NOK, possible case is poor connection between
ND-BT1/E5 and navigation product or failure of the wired secti-
on of ND-BT1/E5.
Select [Menu] [Info/Phone]
[Registration] [Mobile].
Search for the Bluetooth device and enter the passkey by oper-
ating the mobile telephone.
* In case the device name is not displayed in Bluetooth device
search, the possible cause is the failure of the wireless section
of ND-BT1/E5.
When the connection with the BT telephone is completed,
the screen as shown on the left will be displayed.
Antenna bar will be displayed on the [Conection Status] screen.
When the connection is successfully established, conduct spee-
ch test and check the voice transmission and reception.
ND-BT1/E5
6
7
Operation Method
[Hardware] [Conection Status].
[Phone Menu] [Phone Settings]
7
8
A
B
C
D
E
F
19
8