Pioneer AVIC-Z2/XU/UC Service Manual page 281

1
- Bluetooth Test Mode (using spectrum analyzer)
1. Cautions
A
If there is a spectrum analyzer supporting 2.4 GHz at the service site, confirmation of
transmission carrier becomes possible.
Since ND-BT1/E5 cannot operate singly, the AVIC-HD1/EW5 or AVIC-Z1/UC is required.
Carrier existence is checked by removing the product case and applying the probe onto
the "ANT" land of the base unit.
Since it is done by probe connection, the level cannot be confirmed accurately.
2. Function outline
Simple operation check on Bluetooth is executed in test mode using a spectrum analyzer
supporting 2.4 GHz.
B Output check on Bluetooth unit
3. Configuration diagram
AVIC-HD1/EW5, AVIC-Z1/UC
C
4. Procedure for test mode startup
D
E
F
20
1
2
Display
2
3
ND-BT1/E5 Spectrum analyzer supporting 2.4 GHz
Operation Method
Enter the test mode using a product connectable to ND-BT1/E5.
When the test screen is displayed, select [Bluetooth Unit Test]
from the menu.
1) Loop Back(TX)
2) Page Scan
3) Inquily Scan
4) Local TX
5) Local TX(No Modulated) Test (Not used for servicing.)
5) Select Local TX(No Modulated) Test.
ND-BT1/E5
3
4
Test (Not used for servicing.)
Test (Not used for servicing.)
Test (Not used for servicing.)
Test (Not used for servicing.)
4