Pioneer AVIC-Z2/XU/UC Service Manual page 203

1
• "Cursor turns red" if the displayed cursor position cannot be pressed, and it moves to the "next cursor" when it is pressed properly.
• "OK" is displayed for about 2 seconds when touching is completed at 17 points and "NG" when it is closed by pressing
the [Navigation] key during test, and it returns to the touch panel test mode menu.
A
• When successful, " * " is displayed on the left of "4. LINE TOUCH TEST" of the touch panel test mode menu.
B
G Data initialization
C
D
RANGE INIT
− Initialization of outermost rim setting: Initializes the outermost rim setting obtained in monitor test mode.
CALIB INIT
− Initialization of calibration correction: Initializes the calibration correction obtained in monitor test mode.
USER RANGE INIT
− Initialization of user setting outermost rim: Initializes the outermost rim set up by the user.
USER CALIB INIT
− Initialization of user calibration correction: Initializes the calibration correction set up by the user.
E
RETURN TO MENU
− Return to menu: The system returns to the touch panel test mode menu.
• Description of operation
[AV] (main unit) key: Returns to monitor test mode menu.
[Navigation] (main unit) key: Executes the item.
↓
↓ ] (main unit) key: Moves the cursor (selected line: blue).
[P.LIST
F
196
1
2
AVIC-Z1/UC
2
3
3
4
4