Pioneer AVIC-Z2/XU/UC Service Manual page 207

1
[ Mecha ServiceTest - FE Test Power On - ] screen
A
[1] Forcus Close
• • • • • • • • • • • • • • • • • • •
B
[2] CRG + (Start/Stop)
[3] CRG − (Start/Stop)
[4] Forcus Search(Start/Stop)
To close focus after focus search, turn the POWER OFF once and then turn the POWER ON again.
[5] LD-ON/OFF
• • • • • • • • • • • • • • • • • • • •
The system will turn LD-OFF automatically if no there is no operation for 10 seconds after LD-ON. If LD-ON is not
executed within 10 seconds even during focus search, LD-OFF will be executed in 9 seconds even if focus search
is executed after LD-ON.
[6] CRG HOME
• • • • • • • • • • • • • • • • • • • •
FE Offset : FE offset coefficient
AS Offset : AS offset coefficient
C
TG Offset : TG offset coefficient
TE Offset : TE offset coefficient
ENV Offset : ENV offset coefficient
DBAL : DBAL coefficient
[ Mecha ServiceTest - FE Test Focus Closed - ] screen
D
[1] T.Bal
• • • • • • • • • • • • • • • • • • • •
[2] Forcus Jump
• • • • • • • • • •
[3] CRG + (Start/Stop)
[4] CRG − (Start/Stop)
E
FE MAX : FE MAX level
AS MAX : AS MAX level
FE Normal : FE normalization coefficient
TE MAX : TE MAX level
FE MIN : FE MIN level
ENV MAX : ENV MAX level
TE MIN : TE MIN level
S.Gain : Spindle gain coefficient
F
200
1
2
Closes Focus.
Moves the carriage to the rim or stops the carriage.
• • • • • • • • • • •
Moves the carriage to the center or stops the carriage.
• • • • • • • • • • •
Implements or stops focus search.
• •
Implements LD-ON/OFF.
Returns the carriage to home position.
Adjusts the tracking balance.
Focus jump
Moves the carriage to the rim or stops the carriage.
• •
Moves the carriage to the center or stops the carriage.
• •
2
3
AVIC-Z1/UC
3
4
4