Table of Contents
Advertisement
5
3-2(4-2). Testing of External Input
•
When starting the test, set VTR 1 input ON and switch the source to VTR.
When finishing the test, set the VTR 1 input OFF and switch the source to OFF.
•
During the test, input parking brake signals (GND).
•
Video image of VTR1 appears on the screen.
•
After the test is completed, use [AV] key to go back to the main menu.
3-3(4-3). Testing of Back Camera
•
The purpose is to confirm that by inputting the reverse gear signal, camera video image become available in the
setting of monitoring images from the rear view camera.
•
When starting the test, set the back camera input ON and set it OFF when it is completed.
•
During the test, keep sending back-signals.
•
After test is completed, use [AV] key to go back to the main menu.
3-4(4-4). Testing of Rear Monitor Output
•
Confirm that a navigation video image is output on the rear monitor.
•
When starting the test, set the rear monitor output ON and set the rear monitor output Off when finishing it.
•
After test is completed, use [AV] key to go back to the main menu.
5
6
AVIC-Z1/UC
6
7
7
8
A
B
C
D
E
F
209
8
Hide quick links:
Advertisement
Chapters
Table of Contents
