Epson LX-300+II Start Here
Hide thumbs Also See for LX-300+II:

Advertisement

Start Here

Unpacking

1

Assembling the Printer

2
Hook
LX-300+II: 1 spot
LX-1170II: 2 spots
Pull upright and
push firmly
Remove all protective tape
Raise to set
Caution:
This part is not a handle.
Do not hold it to move the printer.
Attach
Attach

Installing the Ribbon Cartridge

3
Remove
Open
Tense the ribbon
Hook and push

Connecting the Power Cord

Insert
4
OFF
Confirm the
(OFF)
Continued
Remove
Push and
hold up
For LX-300+II, confirm the print head is
in the middle
For LX-1170II, confirm the print head is
10 cm from the left side
Insert until it clicks
Attach
Connect
Plug in
Push the ribbon into
the ribbon guide
Tense
Close
Continued on back

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LX-300+II and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Epson LX-300+II

  • Page 1 Unpacking Remove Remove Open Push and hold up For LX-300+II, confirm the print head is in the middle For LX-1170II, confirm the print head is 10 cm from the left side Remove all protective tape Push the ribbon into the ribbon guide...
  • Page 2 ❏ The Windows CD may be required when you install the printer software. If prompted, follow the on-screen instructions and insert the Windows CD. Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by the purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation’s operating...

This manual is also suitable for:

Lx-1170ii

Table of Contents