Panel Board Assembly Removal - Epson LX-300+II RTP Service Manual

EPSON LX-300+II/300+II RTP/1170II

7.1.4 Panel Board Assembly Removal

1. Remove the upper housing. (See 7.1.2 "Upper Housing Unit Removal".)
2. Disconnect the panel FFC from the connector of the panel board assembly.
3. Remove 3 screws (C.B.P., Tite, 3x10 F/ZN; Torque 0.78-0.98 N.M.) securing the
panel board assembly to the lower housing.
4. Remove the panel board assembly from the lower housing.
C.B.P., Tite, 3x10 F/ZN
Panel Board Assembly
Figure7-6. Panel Board Assembly Removal
LX-300+II RTP
Panel FFC
DISASSEMBLY AND ASSEMBLY
Revision D
102