Operation; Control Panel - Epson LX-300+II RTP Service Manual

EPSON LX-300+II/300+II RTP/1170II

1.4 Operation

1.4.1 Control Panel

4 switches and 4 LEDs are on the panel as shown below.
Tear Off
Tear Off
Draft
Draft Condensed
Roman
Roman Condensed
Font
Sans serif
Sans serif Condensed
: LED On : LED Blinks
Figure 1-8. Control Panel
1.4.1.1 Switches

Operation in normal mode
In normal mode, pressing panel switches executes following function;
Table 1-22. Operation in Normal Mode
Switch Function
-Alternates printing with non-printing status.
Pause -Enables Micro Adjustment function and Font selection when it is held down
for 3 seconds.
-Loads or ejects paper.
Load/Eject
-Execute micro feed forward when this function is enabled.
-Executes line feed when it is pressed shortly.
LF/FF -Executes form feed when it is held down for a few seconds.
-Executes micro feed backward when this function is enabled.
-Advances continuous paper to the Tear-off position.
Tear Off
-Select font, when this function is enabled.
PRODUCT DESCRIPTION
Paper Out
Load/Eject
LF/FF
Pause
Micro Adjust
: LED Off

Operation at power on
Turning the printer on while pressing panel switches executes the functions below;
Switch
Load/Eject
LF/FF
Tear Off
Load/Eject & LF/FF
Load/Eject & LF/FF & Pause
Tear Off & Load/Eject & LF/FF
Load / Eject & Pause * 2
3 sec
Pause
Tear Off & Pause
Tear Off & LF/FF
Load/Eject & Tear Off
Tear Off & Load / Eject & Pause Error analyzing mode *
The others
*1 Only for customized models.
*2 LX-300+II only.

Operation in default setting mode
The switches are used in default setting mode as follows:
Switch
Tear Off
LF/FF
The others
Operation
Table 1-23. Operation at Power On
Function
NLQ self test
Draft self test
Default setting
Data dump
Clear EEPROM
Clear EEPROM for Diving Line count for ribbon change
timing.
Color printing position adjustment
Bi-d adjustment
Copy mode * 1
Quiet mode * 1
Simple default setting * 1
1
Not available
Table 1-24. Operation at Power On
Function
Selects the Menu.
Changes the setting.
Not available.
Revision D
24